R-312 POLYLIKIT R-312 ACRYLIC RESIN BASED, ELASTIC FEATURED WATERPROOFING MATERIAL
Polylikit R-312 is a liquid insulation covering that can be applied in liquid form and it is elastic, seamless and robust when dries. It does not contain asphalt and solvent. It is long-lasting waterproofing products, which can be colored with any pigment.
Polylikit R-312 can be applied in the materials such as concrete, brick, plaster, gas concrete, briquette, board, galvanize, sheet metal, zinc, of which water and moisture permeability is not requested. It can be safely used in the repair of all horizontal and vertical surfaces, roof and terraces, window sills, droppers, channel and canalettes, cornice, rain shield, filter and chimney bases, manufactured from these materials.
It must be applied at the earliest 24 hours from previous application and as perpendicular direction to the previous one. If it is walked on Polylikit R-312 or it will be exposed to the mechanical impact, it is recommended to obtain protective coating by applying Polyelast Alum 2K as a topcoat.
APPLICATION IN ROOF AND TERRACES:
APPLICATION IN ROOF AND TERRACES: The floor must be dry and oil-free and inclined in order to prevent the ponding. In case surface is not smooth and holes are available, it must be repaired with Polyelast Alum 2K. After smooth surface is obtained, it must be primed with Marof Primer. Polylikit R-312 must be applied to the all surface after 24 hours with brush or roller as 2 coats. Strip glass-fiber mesh is laid after it is applied as 1 coat to the horizontal and vertical junction points, chimney bottoms and filter edges, which must be applied with glass-fiber mesh and it is pressed to the wet material. After it dries, the material is applied on until glass-fiber mesh is covered.
Polylikit R-312 is definitely waterproof. It is a non-combustible, long-lasting insulation material, which does not contain tar, asphalt and solvent and on which paint can be applied. The application is easy and it has semifluid feature therefore it can be applied to the hard surfaces easily. It is elastic. It elongates 300-400% in 1-1,5 mm thickness, it provides excellent adhesion with all kinds of construction material. It maintains its elastic feature in hot and cold differences. It is resistant against weak chemicals. It allows inhalation in surfaces due to the microporous structure. Bacteria and mold do not grow on material due to its biocides. It is decorative.
Consumption is 0,750 kg/m2 in vertical, 1,5 kg /m2 in horizontal.
NET:4,5 kg box
NET:17 kg bucket
MAROF YAPI END.MAD.SAN.TİC.LTD.ŞTİ.
Çalı Sanayi Bölgesi Geyveli cad. No: 22 NİLÜFER – BURSA / TURKEY
Tel : +90 224 482 3558 Fax : +90 224 482 4182