MENU

B-908 MAROFPLAST 2K

B-908 MAROFPLAST 2K

DESCRIPTION:

Marofplast 2K is a liquid waterproofing material with two components, elasticity and tensile strength intensifier, reinforced with various plastomeric polymer rubber. Liquid component of Marofplast 2K, which has fast-drying feature consisting of suitable polymer resin, powder component consisting of cement based rich natural minerals and components reinforced with various chemicals.

USAGE AREAS:

Marofplast 2K is applied to all horizontal and vertical surfaces. For example; Waterproofing of building foundations, Isolation of curtain wall and retaining walls, Waterproofing of underground parking lot decks, Waterproofing in wet areas such as bathroom, kitchen, toilet, In cracked surfaces or in isolation applications, which is required to be resistant against higher pressure water

ADVANTAGES:

• Marofplast 2K is cool applied.
• The power component inside of package is slowly poured into the liquid component inside of bucket and it is stirred with low-speed mixer until no precipitation remains.
• After mixing is prepared, it is applied with brush or roller.
• It dries between approximately 1-2 hours
• It can be applied on moist surfaces. It must not be applied in the temperatures lower than +5 0C
• It must be applied as three coats; the other coat must not be applied before first coat is thoroughly dried.

PACKAGES:

As a set in bucket;
Net: 18 kg liquid + 6 kg power component

SHELF-LIFE:

It must be protected from frost Minimum shelf-life is 12 months in storage as dry and cool. Do not stack more than 3 high during storage

SURFACE PREPARATION-APPLICATION:

Loose pieces must be scraped and large cracks must be repaired with Marofelast -2K. Before application, Maroflex is thinned in the ratio of 1:3 and must be applied to the surface. Marofelast 2K is cool applied. The power component inside of package is slowly poured into the liquid component inside of bucket and it is stirred with low-speed mixer until no precipitation remains. After mixing is prepared, it is applied with brush or roller. It dries between approximately 1-2 hours. It can be applied on moist surfaces. It must not be applied in the temperatures lower than +5 0C. It must be applied as three coats; the other coat must not be applied before first coat is thoroughly dried.

TOOL CLEANİNG:

Used brush or roller must be washed thoroughly with water immediately.

CONSUMPTION:

In each coat 750 g/m2

TECHNICAL BULLETIN:

 Image title

DETAYLI BİLGİ VE SİPARİŞ İÇİN LÜTFEN BİZE ULAŞINIZ
+90 224 482 35 58
marof-yeni-logo
marof-yapi
marof-line
izo-milli
CONTACT

MAROF YAPI END.MAD.SAN.TİC.LTD.ŞTİ.
Çalı Sanayi Bölgesi Geyveli cad. No: 22 NİLÜFER – BURSA / TURKEY

Tel : +90 224 482 3558 Fax : +90 224 482 4182