MENU

B-902 BITUMEN, WATER-BASED LIQUID INSULATION PRODUCTS MAROFLEX - ANIONIC BITUMEN EMULSION

B-902 BITUMEN, WATER-BASED LIQUID INSULATION PRODUCTS MAROFLEX - ANIONIC BITUMEN EMULSION

DESCRIPTION:

It is a ready for use water isolation product, which is obtained by mixing water and bitumen by using specific methods. After the water in the body is evaporated, it forms a waterproof film layer on applied surface

USAGE AREAS:

It is used in the indoor areas such as all kinds of structures, in all horizontal and vertical surfaces, foundation, basement, wet areas such as bathroom, kitchen, toilet and in the isolation of infiltration water, highway, bridge piers, dam. It can be used similar equipments such as, fiber glass, geotextile and isolation cloth in crack surfaces or in the insulation applications, which requires higher water pressure resistance. Maroflex is used as primer before application of liquid insulation products such as Marofelast, Marofelast (with fiber) and all brands of bituminous insulating covers. Due to its excellent adhesion feature, it provides healthier adhesion of all kinds of bituminous products to the surfaces. By applying construction molds, it provides easy removal of molds and to obtain a smooth surface.

ADVANTAGES:

It is economical. There are no toxic and flammable substances thus it can be easily used in indoor areas. It is water-based thus it can be safely applied on wet surfaces. It creates water-insoluble and wet proof layer. Anyone can easily apply. It provides complete and seamless film layer It is environmentally friendly. It is cold applied, it does not require heating.

SURFACE PREPARATION

The application surface must be freed from dust, dirt, rust and oil. Loose pieces must be scraped. Sharp edges and corners must be rounded.

CONSUMPTION

Approximately 500 gr / square meter in each coat application.

APPLICATION REQUIREMENTS:

Maroflex is cold applied. It is applied with isolation brush and gun after mixing with water in the ratio of approximately 20%. It dries between approximately 3-5 hours depending on the weather conditions. It must not be applied in rainy weathers and temperatures lower than +5 0C . The second coat must not be applied before first coat dries.

PACKAGES:

18 kg. plastic bucket 200 kg. steel bucket

SHELF-LIFE

Shelf life is minimum 18 months in appropriate storage conditions.

CONSUMPTION:

In each application 500 g/m²

TECHNICAL BULLETIN:

 Image title

DETAYLI BİLGİ VE SİPARİŞ İÇİN LÜTFEN BİZE ULAŞINIZ
+90 224 482 35 58
marof-yeni-logo
marof-yapi
marof-line
izo-milli
CONTACT

MAROF YAPI END.MAD.SAN.TİC.LTD.ŞTİ.
Çalı Sanayi Bölgesi Geyveli cad. No: 22 NİLÜFER – BURSA / TURKEY

Tel : +90 224 482 3558 Fax : +90 224 482 4182